Siser Easy Glow in the Dark Neon Heat Transfer Vinyl 12″

The most trusted heat transfer vinyl brand in the world.

Siser HTV Color Comparison Chart

Neon in the Light, Glows at Night!

Have you ever wanted to make a glow in the dark design that was different than the typical eerie green? Enter Easy Glow: the HTV that glows in the dark – in multiple colors! Featuring a palette of vibrant, neon colors, Easy Glow looks stunning in the daytime on any garment! But where Easy Glow REALLY shines is in the dark. When the lights go out, Easy Glow gives off a luminous appearance in a variety of fluorescent colors! Great for costumes, kids’ clothes, and party accessories, Easy Glow is a surefire way to light up your nights!

Easy Glow is 140 Microns / 5.5 Mils and is a PU Composition. Easy Glow is CPSIA Certified so its perfect for decorating childrens clothing and accessories. Approximate width is 11.8″

Craft Cutter Settings (Chart)
Siser Romeo & Juliet

• Blade: Romeo & Juliet 45
• Gram Force: 5-15
• Offset: 0.250
• Speed: 10

Brother Scan N Cut DX

• Blade: Autoblade
• Cut Speed: 5
• Half Cut: Auto

Cricut Explore Air

• Blade: AutoBlade
• Setting: Vinyl+/Everyday Iron On

Cricut Maker

• Blade: AutoBlade, standard
• Setting: Vinyl+/Everyday Iron On

Silhouette 4 & 5

• Blade: AutoBlade, 3
• Material: Heat Transfer Smooth
• Force: 6
• Speed: 8

Roland GS/GX-24

• Blade: 45
• Gram Force: 90
• Offset: .250
• Speed: 30-50 cm/s

Graphtec

• Blade: 45
• Gram Force: 8-9
• Tool: CB09U+0
• Speed: 30 cm/s

Application Instructions
Iron Instructions

• Set iron dial between Cotton and Linen
  
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
  
• Place on flat, hard surface (ironing board not recommended)
  
• Press iron with medium/firm pressure (do not slide iron)
  
• Press each section of design for 15 seconds
  
• Peel carrier cold or warm
  
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds

Heating Press Instructions

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
  
• Preheat garment for 2-3 seconds
  
• Apply design at 305F/150C (EasyPress users add approx. 30)
  
• Use medium pressure for 15 seconds
  
• Peel carrier cold/warm (15 seconds off the press)

Easy Glow Applies To

• 100% cotton
• Poly/cotton blends
• 100% polyester

Laundering Instructions

• Wait 24 hours before first wash
• Machine wash cold with mild detergent
• Dry on normal dryer setting
• Do not dry clean.